Принцип роботи датчика тиску
When the pressure signal acts on the sensor, the pressure sensor converts the pressure signal into an electrical signal, which is amplified by differential amplification and output amplifier, and finally converted into a 4-20mA standard current output signal linearly corresponding to the liquid level pressure of the measured medium (liquid) through V / a voltage and current. Main technical parameters power supply: 24VDC output 4 20mA two-wire system zero position adjustable range: ± 5 percent F.S range adjustment ratio: above 3:1 range range: - 100KPA 0 60MPa load characteristics: maintain constant current output within 0 600 Ω (24VDC power supply) flameproof D Ⅱ BT4, Intrinsically safe IA Ⅱ CT5 overpressure limit: 2 times the above limit pressure temperature range: process: - 20 60 degree accuracy grade: ± 0.5 percent stability: ± 0.2 percent F.S weight: About 1kg characteristic analysis
● super measurement performance for pressure, differential pressure, liquid level and flow measurement
● digital accuracy: plus ({{0}}) 0.05 percent
● simulation accuracy: plus ({{0}}) 0.75 percent plus (-) 0.1 percent F.S
● full performance: plus ({{0}}) 0.25F S
● stability: 0.25 percent 60 months
● range ratio: 100:1
● measurement rate: 0.2S
● miniaturized (2.4kg) all stainless steel flange, easy to install
● the process connection is compatible with other products to achieve the best measurement
● the world's only sensor with H alloy sheath (patented technology) has achieved excellent cold and thermal stability
● intelligent transmitter with 16 bit computer
● standard 4-20mA, with digital signal based on HART protocol, remote control
● support the upgrade to fieldbus and field control based technology.